DIY Planked Firewood Box Building Plans

This post is sponsored by Elmer’s Glue. As always, text and opinions are my own.

I can’t even contain my excitement about this new piece… It not only looks amazing (in my humble opinion!), it fits our space perfectly, serves a truly useful purpose, AND…

I designed and built it myself.

I love this for an entryway! Step by step tutorial and building plans for an "antique" firewood box - perfect for a mini mudroom, too! maisondepax.com

The full plans and tutorial are at the end of the post!

After the 15 millionth time I tripped over my kids (and my *cough* husband’s!) shoes, I knew we needed a better solution for our shoes in this new house. In the old house, we used a bench and trays, but there’s no good spot for that bench near either door, so we’ve been stuck lately. This is my new secret weapon.

gorgeous stairwell and functional entryway with an antique wood firebox used as a mini mudroom | maisondepax.com

I wanted to imitate those antique firewood boxes: primitive, rustic, utilitarian, and gorgeously used. My in-laws have one and it’s a beautiful piece in their home in Santa Fe. Our little fireplace (which we recently gave a makeover!) is actually gas burning, so we don’t need logs…

gorgeous, functional entryway with an antique wood firebox used as a mini mudroom... get the plans to build this diy planked "antique" firewood box here! | maisondepax.com

Leaving this little beauty to act as the perfect mini mudroom near the front door.

gorgeous, functional entryway with an antique wood firebox used as a mini mudroom... get the plans to build this diy planked "antique" firewood box here! | maisondepax.com

I planned it with three things in mind: looking like an authentic antique, fitting our space, and using lumber efficiently. I am SO pleased with the result.

gorgeous, functional entryway with an antique wood firebox used as a mini mudroom... get the plans to build this diy planked "antique" firewood box here! | maisondepax.com

These little hooks left over from my diy rustic towel rack (tutorial coming soon!) are the perfect addition, making this piece functional for hats, scarves, and purses, as well as shoes.

create a gorgeous, functional entryway with an antique wood firebox used as a mini mudroom... get the plans to build this diy planked "antique" firewood box here! | maisondepax.com

And the best part? Even when your shoes inside look more like this (because, let’s get real, they are never perfectly lined up at our house!)…

gorgeous, functional entryway with an antique wood firebox used as a mini mudroom... get the plans to build this diy planked "antique" firewood box here! | maisondepax.com

It still looks like this from the outside. Win for mom. 😉

gorgeous, functional entryway with an antique wood firebox used as a mini mudroom... get the plans to build this diy planked "antique" firewood box here! | maisondepax.com

I’ll be sharing a tutorial for the finish later (because this is already a ridiculously long post!), but here are your full building plans.

Shopping List:
1 – 3/4×16 edge glued pine panel @ 96 inches long
1 – 1×8 @ 8 feet long
1 – 1×12 @ 6 feet long
1 – 1×2 @ 8 feet long
1 – 1×6 @ 4 feet long (you only need 2 feet, though, so use a scrap if you have it!)
1 1/4 inch wood screws
1 1/4 inch finish nails
Elmer’s Wood Glue Max
150 grit sandpaper

Tools:
measuring tape
square
pencil
safety glasses
chop saw or circular saw (I have this one and love it)
jigsaw
sander
nail gun

General Instructions:
Please read the entire plan and comments before beginning this building project. You may need assistance (i.e. an extra set of hands) for some steps of this project. Be sure to take all necessary precautions. Always use straight boards, check for square after each step, and predrill holes before attaching with screws. Be safe and have fun!

Cut List:
4 – 1×8 @ 23.75 inches (front and top)
3 – 1×12 @ 23.75 inches (back)
1 – 1×6 @ 23.75 inches (back)
2 – 1×2 @ 16 inches (interior bottom braces)
2 – 1×2 @ 19 inches
1 – 3/4×16 @ 22.25 inches
**2 – 3/4×16 @ 39.25 on high end (you will need to fit these together as below; do NOT cut straight across your board with your circular saw)

Cutting Instructions:
** I realize that 23.75 inches may seem an odd width for your firewood box. This is to ensure that you can get 4 pieces out of your 8 foot board (compensating for the kerf – the width of your saw blade)

  1. Cut all your straight boards above, then line them up together as shown.
    step by step tutorial and building plans for an "antique" firewood box - perfect for a mini mudroom, too! maisondepax.comSince not all boards (especially 1x12s which tend to have some bowing) are exact widths, you’ll want to use your actual boards to determine the proper height of your side panels: the 1×5 + three 1x12s make up your back (and the taller side of your side panels); three 1x8s make up your front (and the shorter side of your side panels).
  2. Mark your heights on your 3/4×16 panel and draw your pieces to fit together as shown. Sketch your curve as you like.
    step by step tutorial and building plans for an "antique" firewood box - perfect for a mini mudroom, too! maisondepax.com
  3. Cut out one of the side panels using a jigsaw.
    step by step tutorial and building plans for an "antique" firewood box - perfect for a mini mudroom, too! maisondepax.com
  4. Lay the first side on top of the second to trace an identical curve.
    step by step tutorial and building plans for an "antique" firewood box - perfect for a mini mudroom, too! maisondepax.com
  5. Cut the second side panel using a jigsaw.
  6. When finished, all your pieces should look like this (except for the bottom… for some reason, I took this picture before I cut the bottom to fit, sorry! It should be narrower than the planks above it).
    step by step tutorial and building plans for an "antique" firewood box - perfect for a mini mudroom, too! maisondepax.com

Step 1:
Sand all rough edges before beginning assembly. Note: to achieve a more rustic look, sand the edges of each board until they are more rounded rather than sharp corners.

Step 2:
Secure your 16 inch 1x2s to the bottom of your side panels using Elmer’s wood glue Max and screws.
step by step tutorial and building plans for an "antique" firewood box - perfect for a mini mudroom, too! maisondepax.com

Step 3:
Secure your 19 inch 1x2s to the short sides of your side panels using wood glue and screws. Be sure to leave a 1 inch gap between the bottom and side 1x2s (as shown).
step by step tutorial and building plans for an "antique" firewood box - perfect for a mini mudroom, too! maisondepax.com

Step 4:
Stand up your side panel, and using a level to ensure your side panel is standing straight, attach your first 1×8 at a right angle to the short side of your panel using wood glue and finishing nails (see image below for clarity). Repeat for second side.

Step 5:
Once you have created your U shape (with the side panels and your first 1×8), slide your bottom piece in to rest on the horizontal 1x2s. It should fit below the vertical 1x2s. Secure with wood glue and finishing nails.
step by step tutorial and building plans for an "antique" firewood box - perfect for a mini mudroom, too! maisondepax.com

Step 6:
Above the first 1×8, attach two more 1x8s across the front (to the shorter sides of your side panels) using wood glue and finishing nails. As always, wipe of excess glue. One advantage to Elmer’s wood glue Max, though, is that it is stainable, so you won’t ruin your piece if you miss a tiny bit of glue.
step by step tutorial and building plans for an "antique" firewood box - perfect for a mini mudroom, too! maisondepax.comAt this point, your box should look like this.
step by step tutorial and building plans for an "antique" firewood box - perfect for a mini mudroom, too! maisondepax.com

Step 7:
Attach the 1×6 across the bottom on the back of the box (the taller side of the side panels) using wood glue and finishing nails.

Step 8:
Stack a 1×12 above the 1×6 and securing using wood glue and finishing nails. Repeat for the remaining 1x12s. Your box should be complete except for the top.

Step 9:
Attach your final remaining 1×8 across the top and secure with wood glue and finishing nails.
step by step tutorial and building plans for an "antique" firewood box - perfect for a mini mudroom, too! maisondepax.com

Finishing:
I have a full tutorial to come separately on the very distressed finish I achieved which involved stain, layered milk paint, wax, and hemp oil. Once you fill your nail holes, though, you can paint or stain this piece to your liking. Finish it off with some antique looking hooks for greater function as a mini mudroom.

gorgeous, functional entryway with an antique wood firebox used as a mini mudroom... get the plans to build this diy planked "antique" firewood box here! | maisondepax.com

Though I wouldn’t call this a beginner build (probably more like intermediate), it’s really not hard. And the rustic nature of the box allows for some imperfections, too. 😉  Remember, power tools may be fun, but they require knowledge and safety precautions. Please make sure you are working safely! And if you build one, be sure to send me a picture.

Want more diy projects and inspiration? Sign up for Elmer’s DIY newsletter here!

pin it image

I love this for an entryway! Step by step tutorial and building plans for an "antique" firewood box - perfect for a mini mudroom, too! maisondepax.com

 MORE DIY PROJECTS:

How to Build a Simple Mantel

I love how this simple diy mantel changes the fireplace! Find out how to build a simple fireplace mantel (or faux fireplace shelf!) with this easy to follow tutorial | maisondepax.com

Industrial Spool Table

Love this project! How to make a table from an industrial spool via maisondepax.com #diy #outdoorliving #tutorial

DIY Tub Shelf

Step by step tutorial for a gorgeous wooden tub shelf. So easy to make and a perfect gift! maisondepax.com

Similar Posts

18 Comments

  1. I love everything about this wonderful project, especially the fact that the authentic design hides the useful purpose! Congratulations on a beautiful job!! I love using milk paint -your finish is fantastic!

  2. I have been seeing this and wondering where you got it,just thought it was something from your parents. So glad you made it and now i can make it too, i hope! lol! Thanks Rachel i really like this, you have a great weekend.

  3. I am thinking of making one of these, but one change that I am thinking of is using a 1×4 on the bottom of the front and hinging it to open out. This way I can easily clean the bottom of the box. Firewood boxes can get pretty messy on the bottom after a winter of holding wood.

    1. I am sorry that there is not a printable version, but you can certainly copy and paste the text if you want a hard copy.

  4. I’m just finding your blog, and I love it! I already have several projects added to my list now. Can you tell me if you posted about how to achieve this finish?

Leave a Reply

Your email address will not be published. Required fields are marked *