DIY Gel Stain Cabinets (No heavy sanding or stripping!)

Breathe new life into tired, outdated cabinets with this step-by-step, affordable tutorial for updating cabinets with gel stain.  Keep the wood-grain look of stained cabinetry without the work of heavy sanding or stripping!  

How to use gel stain: maintain wood grain and update a bathroom with orange oak into a modern, sleek space with no stripping or sanding!

Y’all.  I’m SO excited today to introduce one of my oldest friends.  Vanessa and I met on the first day of college when we were both just 17.  Like me, she has three beautiful children (all incredibly close in age to mine!), and she has been one of my greatest companions through this blog.  She has encouraged me, supported me, and talked “design” with me for hours and hours…  When I saw how she transformed the look of her bathroom recently, I asked if she would be so kind as to share the project with you.

And she said yes!

So without further ado…

____________________

Hello! Thanks so much for the introduction, Rachel! Our family leads a busy and rich life, and, like most of you, time and finances are tight. My goal is to take on small projects on a tight budget with a big impact! My home was built in the 60s—a good era for hardy construction, but also dingy, orange palettes.

I don’t have a lot of before pictures of my bathroom—but imagine orangey oak, yellow-orange speckled countertops, yellow tile, and dated bathroom lighting. This bathroom is attached to our guest room and embarrassed me as I tried to ‘hide’ its jaundiced glow with pretty flowers and soaps. 😉

Slowly, over a six-month period and during many nap and after-bed times, I updated the bathroom with wall paint, a new marble backsplash, mirror framing and new lighting.  Later, I added a new sink, faucet, and painted the countertops. See my source-list at the end of the post for ‘where to shop.’

 

 

 

tip: use a glass tray for bathroom essentials... gorgeous with that marble backsplash!

The last piece to this thrifty update was the cabinets.  The orange oak had to go.

How to use gel stain: maintain wood grain and update a bathroom with orange oak into a modern, sleek space with no stripping or sanding!

I considered painting my cabinets like my kitchen and upper bath, but stained cabinets bring warmth and rich design to a room.  I also believe that staining surfaces is more durable than paint, but the prep and cleanup can be messy. Most stains require removing the original finish and a lot of sanding/dust.

Gel stain provides the durability ֹof stain, but the application of paint.

Staining cabinets isn’t difficult, but I did choose to wait until I could safely use oil products after the pregnancy of my last baby. You want to be cautious—use eyewear, wear a respirator mask, use gloves and open the windows for ventilation. The result, though, is totally worth it.

How to use gel stain: maintain wood grain and update a bathroom with orange oak into a modern, sleek space with no stripping or sanding!

I decided to use General Finishes Java Gel stain for this project.  I used this product on my dining table and three years later, with heavy use, it has held up almost perfectly. The can of stain is still easily one-thirds full after 2 projects, so it is an economical option for multiple projects (#budget!). It also meant I didn’t have to strip the original finish off my cabinets. If you take the appropriate steps to prep your cabinets, you will have a durable, beautiful finish.

How to use gel stain: maintain wood grain and update a bathroom with orange oak into a modern, sleek space with no major stripping or sanding!

How to Use Gel Stain to Update Bathroom Cabinets:

MATERIALS NEEDED:

This post contains affiliate links for your convenience.  Click here to read my full disclosure policy.

HOW TO:

Preparation:

  1. Remove cabinets and hinges with screwdriver and clean hinges with dish soap diluted in water. Set hinges aside.
  2. Scrub/clean all cabinet surfaces and allow to dry. Be sure to remove all residue (old toothpaste is persistent). I noticed a few spots where the stain didn’t adhere and had to re-clean and stain again.
  3. Sand all surfaces with the sanding block. Use the beveled edge to get inside cabinet lips and facets. Your goal is to lightly scuff the surface, NOT remove the finish.
  4. Wipe dust away with a damp cloth.
  5. Wipe cabinets with deglosser.
  6. Allow cabinets to dry in dust-free environment.
  7. Using painter’s tape (I prefer Frogtape), tape off wall and floor surfaces where you do not want stain. Drape drop cloths to prevent drips from staining your floors.

Note: This is the same process for prepping cabinets to paint. You would then follow with 2 coats of primer prior to paint.

Staining:

  1. Wearing the gloves, gently stir the gel stain.
  2. Beginning with the backside of the cabinet, coat each cabinet lightly with the gel stain using an old cloth or foam brush. It will appear streaky; that’s ok. Don’t apply too thickly. Do not remove the stain (treat it like a paint).
  3. Repeat with cabinet frame.
  4. Wait 24 hours to recoat (tip: store your cloth or brush in a storage bag so you can use it again).
  5. After 24 hours, gently flip the cabinets over to the front side.
  6. After 24 hours, repeat with second coat on the front of cabinets (note: you might want to apply three, but two was perfect for me). Allow to dry.
  7. Wait 48 hours to apply the top coat. Gently stir the top coat and be careful not to introduce bubbles to the solution. Using a clean cloth, wipe light coats in quick strokes on the cabinets, waiting eight hours in between coats. Two coats should be sufficient.
  8. After 24 hours, check to make sure the topcoat is dry. If it is still tacky, wait another day.
  9. Reassemble the cabinets when thoroughly dry (tip: If you have a lot of cabinets and drawers, it doesn’t hurt to label which ones go where with some masking tape or a light pencil mark).
  10. Step back and enjoy the results!

How to use gel stain: maintain wood grain and update a bathroom with orange oak into a modern, sleek space with no major stripping or sanding!

With this tutorial, I believe you can achieve a great finish and breathe new life into old cabinets. With patience and planning, you can take small steps towards transforming your space with a modest budget.

Source List:

How to use gel stain: maintain wood grain and update a bathroom with orange oak into a modern, sleek space with no major stripping or sanding!

 

Did you enjoy that?

Have my best tips on home decor, DIY, and life delivered directly to your inbox.

Powered by ConvertKit

Comments

  1. Wow! It looks great!! Thanks for the tutorial. I may have to try this in my bathroom.

  2. Woah!! Bathroom looks amazing!!

  3. That looks great! The whole bathroom feels fresh and clean, but personalized. Love it.

  4. Such a great post! I can’t believe how much of a difference coloring the cabinets made.

    Love the blog, keep up the good work!

    Bailey • http://www.hotdresshotmess.com

  5. Looks amazing!

  6. looks great!

  7. Will the gel work on laminate/ particle board cabinets?

  8. Many times in bathroom cabinets the side by the toilet isn’t real wood. It’s more of a veneer. Did you run into that with your project? Can the gel stain be applied to that as well?

    • Vanessa Kynes says:

      YES! It is veneer on the side of the cabinet and the base. I treated it exactly the same (obviously it doesn’t sand like the wood doors) and took the stain beautifully.

  9. GEORGIANN says:

    What type of primer did you use before painting? You said to apply 2coats of primer before painting.

    Thank you! Can’t wait to do this!

    • Vanessa Kynes says:

      Hi! I mentioned primer if you were planning on using latex paint, but for the gel stain, you don’t need primer. You just need to make sure you clean, sand, and degloss! Hope that is helpful!

Leave a Reply

Your email address will not be published. Required fields are marked *